pyw

Maximum Height 6000mm. Bespoke Gates available
Maximum Width 8000mm. Bespoke Gates available
Construction Posts: Rolled Hollow Sections (RHS)
Top section H beam or steel section clad with Zintec sheet
Gateleaf frames: 100mm x 200mm RHS
Hinges are size-dependent, minimum 25mm stainless steel with sealed oil filled bearings. Gate infill minimum 25 x 25 mm, size-dependent.
Finish Shotblasted to clean metal, hot-dipped galvanised or coated with 100 microns of zinc. A special 3-part coating system with polyurethane top coat - typical first time maintenance of 20 years.
Safety Gates always supplied with failsafe protection on leading edges. Additional safety such as photocells, interactive IR detectors or magnetic loops can be provided.
Drive Unit Underground hydraulic or top mounted electro-mechanical
Operating Speeds Drive dependent: 300mm/sec to 1200mm/sec

Controls

 Microprocessor controlled drive unit which can interface to any standard control system, i.e. card reader etc.

Power

 3 phase 15 A 400 V +/- 10% or 1 phase 10 A 220 V +/- 10%, both 50/60 Hz

Operating temperature

 -25 to +55 degrees Centigrade
Mechanical life

(MCBF) 1 x 106
Fixing Size dependent, full fixing details available

Bi-folding Speed Gates Specification

The Bi-folding Speed Gate is the latest addition to Frontier Pitts range of electrically operated hinged vehicle gates, designed specially to be fast acting for high intensity use whilst providing maximum security. For Bi-folding Gate Safety, please click here