PAS 68 Terra Gate Mk II (Sliding Cantilevered)
High security cantilevered sliding gate. Classification code: V/7500[N3]/80/90:1.5/0.0 |
NEW FOR 2011
Classification code for the Terra Gate Mk II V/7500[N3]/80/90:1.5/0.0 Product Tested Dimensions -
3m high 4.5m wide Foundation depth of only 500mm required.
|
|
-
DOWNLOADS- FP0 Corporate Guide (Flash)
- FP1 Product Guide (Flash)
- FP20 Anti Terra Product Guide - BSi PAS 68 Impact Tested Products (Flash)
- AT Range Datasheet PAS 68
- Product Range
- Maintenance Contracts
- Press
- Project Spotlight
- Anti Terra Footage
- Anti Terra Datasheets
- Exhibitions
- Account Opening Form
- Standard T&C's
 |
The Terra Sliding Cantilevered Gate (Terra Gate Mk II), like all Frontier Pitts products are all designed, built and CE marked in the UK to the most stringent international standards. These tests have been witnessed by CPNI (Centre for the Protection of National Infrastructure), previously NSAC (National Security Advice Centre); the UK Governments Advisory Body for Security. The Frontier Pitts crash rated Terra Gate Mk II is available in widths of up to 4500mm and height of 3000mm |
- Minimal site penetration - V/7500 [N3]/80/90:1.5/0.0
- PAS 68 impact absorption 1852KJ
- Bespoke widths up to 4500mm available
- Variable heights available (standard 2400mm) up to 5000mm
- Shallow foundation depths of only 500mm required
- Gate leaf with Heavy Duty Crash Impact Beam. Heavy duty posts
support the gate leaf
- Cantilevered Gate, no track or support across the roadway is required, therefore no roadway excavation required
- The balance is provided by a unique enclosed "runback", which enables
the gate to be fully projected across the roadway without tipping
- Electronic control motor drive unit
- Manual operation under power fail conditions
- Retro fit possible to existing gate on site.
 |
 |